| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
School basketball court square planning lines gasoline cold jet marking machinery Hand-Push Cool Spraying Liner
Operation process of cold injection marking machine:
one. ) Verify that the machine is filled with gasoline, oil and hydraulic oil.
two. ) Open the return valve before startup, and adjust the pressure regulator to zui low.
three. ) Adjust the gun to the desired height before turning on.
four. ) Pull open the machine first and pass it over with the water or the dilute material.
five. ) After the boot, first discharge the air with a little pressure to hold the return pipe to know the discharge.
six. ) Turn off the return valve after starting the feed, and adjust the spraying finish and pressure.
seven. ) After the work, stop the pressure or rinse the machine until it is clean.
eight. ) Make sure to check off the oil switch before the machine is checked to prevent the oil from mixing with gasoline.
| Name | Cold spray marking machine |
| Type | Road machinery |
| Color | Blue |
| Flow rate | 2.8 litres/min |
| Pressure | 228 kg/cm2 |
| Power | 6 HP |
| Airbrush | 1 |
| Line width | 5-25 cm |
| Maximum marking speed | 5 km/h |
1. 24 hours on line service, support Chinese, English, Spanish, French, German, Russian ,technical guidance.
2. When meets machine failure problem, our factory will ensure that the problem is solved within 1 hour.
3. Povide machine install video.
4. Provide logistics information, like shipping by sea, shipping by express DHL, FEDEX delivery, real-time tracking service.
5. If machine is broken ,Non-human causes,the new machine will be provided or new parts will be provided.
Are you manufacture?
Yes. We are one of leading manufacturers
Do youhave Stockproductions to sell?
Yes,ofcourse.Butwe also offer OEM service. Please send us some drawing.
What information do you want to know if i want to get a quotation?
a). The model/size of your products.
b). The application for your products.
c). Special package methods if you needs.
d). Raw material.
Do you inspect the finished products?
Yes.Each step of products will be carried out inspection by QC department until shipping
What advantages do you have?
(1) Punctual: Have your orders met with the latest delivery?
We are a manufacturer with so many advanced and new machines. It ensures we have the ability to carry out the production schedual for punctual delivery.
(2) 20year production experience. We have over 20 years exprerience in this industry.
That means we can preview the problems for the orders and production. Therefore, it will make sure to deduce the risk of bad situation to happen.
(3) Point to point service.
There is two sales departments who will serve you from inquiry to products shipped out. During the process, you just need to discuss with him for all the problems and the way sames much times
){kind=link}