| Customization: | Available |
|---|---|
| After-sales Service: | Online Instruction |
| Warranty: | 3 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Small pipe grouting is a measure of shallow buried tunnel support. In the weak and broken strata, it is easy to collapse the hole after drilling, and it is difficult to apply the leading bolt or the structure section is large, the small leading pipe support should be adopted. Leading small pipe support must be used with steel arch. When conditions permit, advance grouting reinforcement can also be carried out on the ground; When there is a guide tunnel, radial grouting reinforcement can be carried out around the tunnel in the guide tunnel.
2. The general measurement of small pipe grouting support is as follows: the diameter of steel pipe is 30-50mm, the length of steel pipe is 3-5m, the distance between grouting holes drilled for steel pipe is 100-150mm, and the distance between circular arrangement of steel pipe along the arch is 300-500mm. The circumferential insertion Angle of the steel pipe along the arch is 10° -15 °, and the small pipe is the force rod, so the two rows of small pipes should have a certain lap length in the longitudinal direction, and the lap length of the steel pipe along the longitudinal direction of the tunnel is generally not less than 1m.
Before the installation of the pipe, the working face should be closed tightly and firmly, and cleaned up, and the position of the drill can be measured before construction.
3. In order to ensure the stability of the working face and the safety of excavation, the installation position of the small catheter should be correct and the effective length should be sufficient, and the drilling Angle of the small catheter should be strictly controlled. C, used as a small conduit, has a grouting hole for grouting reinforcement to the soil, which is also conducive to improving the stiffness and strength of the small conduit itself.
4 Small pipe grouting should use cement slurry or cement mortar. The grout must be filled with cavities and surrounding voids, and the amount and pressure of grouting should be determined by test.
In order to ensure grouting quality and prevent leakage, sealing holes should be set at the tail of small conduits during tunnel excavation.
| Feeding length | 5000mm |
| Feeding accuracy | ±0.2mm |
| Punching efficiency | 1-2S/time |
| Motor power | main motor: 7.5KW servo motor: 1.5kW |
| Overall size | 5800*650*800mm |
Are you manufacture?
Yes. We are one of leading manufacturers
Do you have stock productions to sell?
Yes,of course.But we also offer OEM service. Please send us some drawing.
What information do you want to know if i want to get a quotation?
a). The model/size of your products.
b). The application for your products.
c). Special package methods if you needs.
d). Raw material.
Do you inspect the finished products?
Yes.Each step of products will be carried out inspection by QC department until shipping
What advantages do you have?
(1) Punctual: Have your orders met with the latest delivery?
We are a manufacturer with so many advanced and new machines. It ensures we have the ability to carry out the production time for punctual delivery.
(2) 20year production experience. We have over 20 years experience in this industry.
That means we can preview the problems for the orders and production. Therefore, it will make sure to deduce the risk of bad situation to happen.
(3) Point to point service.
There is two sales departments who will serve you from inquiry to products shipped out. During the process, you just need to discuss with him for all the problems and the way sames much times.
The picture of the machine is for reference only. The actual machine is subject to customer order.
){kind=link}